Planner Single Student Desk 20" x 27" x 22"-32"

The 1 1/4” or 3/4” thick WORK SURFACE consists of
a 45 lb density particle board core with a .030” high
pressure laminated surface and a .020” melamine
backer sheet. The edge of the work surface features
t-mold edge molding that is fastened every 6 to 8
inches to assure a long lasting fit.
The FRAME is attached to the pre-drilled holes in the
top with (12) #10 x 5/8“ screws through a 3 1/8”W x
18“L 14-gauge steel mounting plate. The mounting
plate is welded to (2) 1 1/4” square 14-gauge steel
tube legs which is welded to a 1” square 14-gauge
steel tube and adjust in height from 22” to 32” in 1”
increments. The adjustment for each leg is secured
with (2) 3 3/4” -16 x .675” Allen screws. The right
and left leg both include the Smith System patented
backpack peg allowing for either inside or outside
positioning. The legs are tied together for added
strength with a 6” high 18-gauge steel panel and (4)
Connector Bolts. Legs have 1” adjusting leveling
glides.