Pneumatics Kit 2 - Double Acting Cylinders EDR

Kit 2 is a complete pneumatics add-on for VEX EDR. The cylinders are Double Acting, meaning they use air pressure to extend and retract the piston.
Uses one VEX EDR Controller I/O port per air cylinder
Reservoir is filled using a standard tie pump fitting


(2) Solenoid Driver - Cable w/Driver, Connects one VEX EDR I/O Port to one Solenoid
(1) Tire Pump Fitting - Shraeder Valve With 4mm Tube Fittings - 8090410075
(1) Reservoir - Reservoir, 1-1/2" X 4", w 1/8"NPT & M5 port - US14227-S0400
(1) On/Off Switch - Finger Valve - VHK3-04F-04F
(1) Pressure Regulator - Mini Regulator w/ 4mm Fittings - A-474-0000005
(1) "T" Fitting - "T" Fitting for Valves - KQ2T04-00 or "-00A"
(2) Cylinder, Bi-directional - Dbl Acting Cylinder 10mm Bore - NCJ2D10-200
(2) Solenoid, Fwd, Reverse - 5/2 Single Solenoid Valve, 5VDC - SYJ3120-SMO-M3-F
(2) Flow Meter - M5 elbow meter out flow control 4mm tubing - AS1201F-M5-04T
(6) Fitting for Valves - Fitting 4mm Tubing x M3 Thread - KJS04-M3 or "-M3G"
(1) Fitting for Reservoir - 1/8 X 4mm Male Connector To Reservoir - KQ2H03-34S or "-34AS"
(2) Fitting for Cylinders - M5 Male Connector for Cylinders - KQ2S04-M5 or "-M5A"
(1) Tubing - 4mm X 1696mm Length Tubing - TUO425B-X81US1696
(2) Cylinder Mount - Mount for Cylinder - CYLINDER-MOUNT
(2) Cylinder Nut - Nut for the Cylinder Mount - CYLINDER-NUT
(2) Cylinder Rod Pivot - Pivot for the Cylinder Rod - CYLINDER-ROD-PIVOT