Gusset Pack EDR
N.º de artículo
276-1110
Angle Gussets are used for strengthening "T" joints. Slots on both main flanges allow for adjustment on two axis. Can also be used as a motor mount Made from cold rolled steel, 0.032" thick, zinc plated Plus Gussets are a generic gusset for strengthening flat joints. Can be easily cut into a "T"
Descripción
Angle Gussets are used for strengthening "T" joints. Slots on both main flanges allow for adjustment on two axis.
Can also be used as a motor mount
Made from cold rolled steel, 0.032" thick, zinc plated
Plus Gussets are a generic gusset for strengthening flat joints. Can be easily cut into a "T" gusset or an "L" gusset.
Made from cold rolled steel, 0.032" thick, zinc plated
Pivot Gussets allow parts to be connected at any angle from 0 to 90 degrees. Can also be used as a corner gusset.
Made from cold rolled steel, 0.032" thick, zinc plated
Can also be used as a motor mount
Made from cold rolled steel, 0.032" thick, zinc plated
Plus Gussets are a generic gusset for strengthening flat joints. Can be easily cut into a "T" gusset or an "L" gusset.
Made from cold rolled steel, 0.032" thick, zinc plated
Pivot Gussets allow parts to be connected at any angle from 0 to 90 degrees. Can also be used as a corner gusset.
Made from cold rolled steel, 0.032" thick, zinc plated
Especificaciones
U_esquimico | N |
U_Quimico | N |
Comentarios (0)
Todavía no hay comentarios.
Motor 393 Integrated Encoder Module (2-pack) EDR
N.º de artículo
276-1321
3.25" Omni-Directional Wheel (4-Pack)
N.º de artículo
276-3526
Metal & Hardware Kit EDR
N.º de artículo
276-2161
1x3x1x35 Aluminum C-Channel (6-pack)
N.º de artículo
276-4359