Vernier Circuit Board 2

N.º de artículo VCB2
0 comentarios Escribir una revisión
Description The Vernier Circuit Board 2 is a basic electricity lab on a board. The turret terminals for every component make it easy to connect basic series and parallel circuits, examine the behavior of different components, and investigate RLC circuits. The Vernier Circuit Board 2 includes 10
Precio
$204.45
Antes de impuestos
Agotado Existencias bajas En existencia
Este producto no puede ser pedido en este momento.
Descripción
Description

The Vernier Circuit Board 2 is a basic electricity lab on a board. The turret terminals for every component make it easy to connect basic series and parallel circuits, examine the behavior of different components, and investigate RLC circuits. The Vernier Circuit Board 2 includes 10 bulbs, a resettable fuse, three powering options, 10 alligator clip leads, terminal clips to add your own components, and pre-installed components.
Installed Components

R1 and R2–10 Ω resistors rated at 5 W
R3 and R4–51 Ω resistors rated at 2 W
R5 and R6–68 Ω resistors rated at 2 W
R7–22 kΩ resistor rated at 1 W
R8–47 kΩ resistor rated at 1 W
R9–100 kΩ resistor rated at 1 W
R11–4.7 kΩ resistor rated at 1 W
C1–1 µF non-polar capacitor
C2–10 µF non-polar capacitor
3 E-10 lamp sockets
LED and 220 Ω current limiting resistor
L1–5 mH inductor, with powdered iron core in a clip
1 kΩ linear potentiometer
85 dB buzzer
SW2–single-pole, double-throw (SPDT) switch
SW3–single-pole, single-throw (SPST) momentary switch

The Vernier Circuit Board 2 can be used interchangeably with the Vernier Circuit Board in experiments included in Physics with Vernier and Advanced Physics with Vernier–Beyond Mechanics.

Specifications

Size: 10 in. x 6.5 in. (25.5 cm x 16.5 cm)
Mass: ~0.44 kg
Optional power sources:
up to 4 AA batteries, not included
LabQuest Power Supply, not included (or other 5 VDC adapter with center-positive ⅛ inch connector)
DC power supply such as Extech Digital DC power supply
Vernier Power Amplifier
Maximum voltage: 10 V
Resettable fuse opens at 0.8 A, but 0.3 A or less is recommended
All parts ROHS compliant



What’s Included

One circuit board
Ten insulated jumper wires fitted with mini-alligator clips
Five #48 lamps rated 0.06 A at 2.0 V (cylindrical body)
Five #50 lamps rated 0.220 A at 7.5 V (round body)
Comentarios (0)
Todavía no hay comentarios.
    Cargando
    Cargando