Nitrate Ion-Selective Electrode BNC

N.º de artículo NO3-BNC
0 comentarios Escribir una revisión
Connect the Nitrate Ion-Selective Electrode BNC to our electrode amplifiers to measure the potential (mV) and calculate the concentration of nitrate (NO3-) ions in aqueous samples. Description The Vernier Nitrate Ion-Selective Electrode BNC Connector is a BNC-terminated electrode used to measure the
Este producto no puede ser pedido en este momento.
Descripción
Connect the Nitrate Ion-Selective Electrode BNC to our electrode amplifiers to measure the potential (mV) and calculate the concentration of nitrate (NO3-) ions in aqueous samples.

Description
The Vernier Nitrate Ion-Selective Electrode BNC Connector is a BNC-terminated electrode used to measure the concentration of nitrate (NO3–) ions in aqueous samples. Use with Vernier interfaces requires the Electrode Amplifier. Also compatible with Go Direct® Electrode Amplifier.

Specifications
Range (mV):
Electrode Amplifier: -450 mV to +1100 mV
Go Direct® Electrode Amplifier: -1000 mV to +1000 mV
Range (concentration): 1 to 14,000 mg/L (or ppm)
Reproducibility (precision): ±30mV
Interfering ions: ClO4–, I–, ClO3–, F–
pH range: 2.5–11 (no pH compensation)
Temperature range: 0–40°C (no temperature compensation)
Electrode slope: +55 ±3 mV/decade at 25°C
Electrode resistance: 0.1 to 5 MΩ
Minimum sample size: must be submerged 2.8 cm (1.1 in)
Download the user manual for full specifications

What’s Included
Nitrate Ion-Selective Electrode with BNC terminated end, packed with a storage bottle
30 mL bottle of High Standard solution with SDS (1000 mg/L Ca2+)
30 mL bottle of Low Standard solution with SDS (10 mg/L Ca2+)
Short-Term ISE Soaking Bottle
Requirements
The Nitrate Ion-Selective Electrode BNC connects via BNC to one of our Electrode Amplifiers.
Comentarios (0)
Todavía no hay comentarios.
    Cargando
    Cargando